Automower ® Intellegent Mapping (Aim) - Husqvarna AUTOMOWER 535 AWD Operator's Manual

• Dashboard that shows the current status of the
product and the battery state of charge.
Note:
All countries do not support cellular connection
®
to Automower Connect because of regional specified
cellular systems. The included Automower
lifetime service only applies if there is a third part sub-
supplier of available in the operational area.
3.10.1 To install the Automower
app
1. Download the Automower
mobile device.
2. Sign up for a Husqvarna account in the
®
Automower Connect app.
3. An e-mail is sent to the registered e-mail address.
Follow the instructions in the e-mail in less than 24
hours to validate your account.
4. Log in to your Husqvarna account in the
Automower ® Connect app.
3.10.2 To pair Automower
the product
To start the product for the first time
1. Do step 1-6 in
on page 21 .
2. Obey the instructions in the Automower
app.
20 - Installation
®
Connect
®
Connect
® Connect app on your
®
Connect and
®
Connect
3.10.3 Download firmware over the air
(Firmware over the air FOTA)
The product has a function that automatically downloads
new firmware. When a new firmware is available, a
notification shows in the app where you can select to
install the new firmware. In the factory setting this
function is enabled.
®
3.10.4 Automower Direct
®
Automower Direct uses short-range Bluetooth
communication, and is included in Automower
AWD.
Husqvarna cannot guarantee the time period or
coverage of the long-range cellular connectivity. It is
possible to communicate with the product through
®
Bluetooth if you are in short-range of the product. You
can use Automower ® Direct without a Husqvarna
account as long as you have the product PIN code.
3.10.4.1 To start to use Automower
1. Download the Automower
mobile device.
2. Select Automower ® Direct on the start screen of
®
the Automower Connect app.
®
3. Start Bluetooth on your mobile device and on the
To start the product for the first
product, refer to
time on page 21 .
Settings symbol in the display and
4. Go to the
®
activate Bluetooth .
5. Select the product to pair with in the Automower
Connect app.
6. Enter the PIN code for the product.
Note:
You have access to the menus and functions as
®
long as you are in Bluetooth
®
3.11 Automower Intellegent Mapping
(AIM)
®
Automower Intellegent Mapping (AIM) is available in
the Automower ® Connect app. The technology uses
different sensors, GPS included, in the product. The
precision of the map is approximately m / ft.
®
® 535
®
Direct
®
Connect app on your
®
short-range.
1427 - 006 - 25.11.2021