Pppoe (Username / Password) - D-Link DWR-953 User Manual

Section 3 - Configuration
PPPoE (RFC-2516 PPP over Ethernet)
Select Enable to enable the connection or Disable to disable the
State of
Connection:
connection.
Specify a Static or Dynamic IP address.
IPMode of
Connection:
IP Address: If you have selected Static IP, enter the IP Address provided by
your ISP or network administrator.
Subnet Mask: If you have selected Static IP, enter the subnet mask provided by
your ISP or network administrator.
NAT: Disabling this option will disable the NAT firewall function of
the DWR-953, exposing all connected devices directly to the
Internet. This is an advanced feature and not recommended for
normal use.
Authentication Specify if the connection is authenticated with PAP (Password
Method:
Authentication Protocol), CHAP (Challenge -Handshake
Authentication Protocol), MS-CHAP (Microsoft Challenge
Handshake Authentication Protocol), or Auto. This setting is
determined by your ISP or network administrator.
User Name: The username provided by your ISP for your PPPoE account.
User Password: Password provided by your ISP for your PPPoE account.
Confirm Re-type your password in this field.
Password:
D-Link DWR-953 User Manual

PPPoE (Username / Password)

14