Pppoe (Username/Password) - D-Link DIR-868L User Manual

Wireless ac1750 dual-band gigabit cloud router usb 3.0

Hide thumbs Also See for DIR-868L:

User manual (173 pages)

Quick installation manual (64 pages)

Manual (59 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

Table of Contents

Section 3 - Coniguration

Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password.

This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer. The software is no longer needed and

will not work through a router.

My Internet

Select PPPoE (Username/Password) from the drop-down menu.

Connection:

Address Mode:

Select Static IP if your ISP assigned you the IP address, subnet mask,

gateway, and DNS server addresses. In most cases, select Dynamic.

IP Address:

Enter the IP address (Static PPPoE only).

User Name:

Enter your PPPoE user name.

Password:

Enter your PPPoE password and then retype the password in the next box.

Service Name:

Enter the ISP Service Name (optional).

Reconnect

Select either Always-on, On-Demand, or Manual.

Mode:

Maximum Idle

Enter a maximum idle time during which the Internet connection

Time:

is maintained during inactivity. To disable this feature, enable Auto-

reconnect.

DNS Mode:

Select whether to Receive DNS from ISP or Enter DNS Manually. For Manual, enter the DNS information below.

DNS Addresses:

Enter the primary and secondary DNS server addresses (Static PPPoE only).

D-Link DIR-868L User Manual