Advanced Wireless - D-Link DWR-953 User Manual

Section 3 - Configuration
Wireless router settings:
SSID The default setting is Enable. Select Disable if you do not want
Advertise:
to broadcast the SSID of your wireless network.
Transmit
Set the transmit power of the Wi-Fi radios.
Power:
Fragment The fragmentation threshold, which is specified in bytes,
Threshold:
determines whether packets will be fragmented. Packets
exceeding the 2346 byte setting will be fragmented before
transmission. 2346 is the default setting.
RTS This value should remain at its default setting of 2347. If
Threshold:
inconsistent data flow is a problem, only a minor modification
should be made.
Beacon Specify a value for the beacon interval. Beacons are packets sent
Interval:
by an access point to synchronize a wireless network. 100 is the
default setting and is recommended.
Settings for 11n mode only
Channel Specify a channel width of 20, 40 , or 80 MHz (5 GHz only). The
Width:
wider the channel, the faster the maximum data rate. However,
wider channels both cause more interference and are themselves
more vulnerable to interference. Therefore, in crowded network
environments, smaller channel sizes may be more appropriate. The
default and recommended setting is 40 MHz.
D-Link DWR-953 User Manual

Advanced Wireless

38