Default Route - D-Link DWR-953 User Manual

Section 3 - Configuration

Default Route

Current Displays the current default route.
Default
Route:
If you wish to change the default route, select ETH0_WAN
Change
Default
(if your Ethernet is configured for Static IP, DHCP, or Bridge
Route:
mode),ETH0_PPPoE (if your Ethernet WAN is configured for
PPPoE), or LTE_Modem_PPP for cellular Internet access.
Click Apply to save your settings, or Cancel to revert to your previous settings.
D-Link DWR-953 User Manual
Default Route
24