Table of Contents
Advertisement
PRODUCT SET-UP
EASY SETUP WIZARD
PC
Router
Modem
PC
Modem
Router
PC
Modem
Router
Internet
Save
ADVANCED SET-UP (ACCESS VIA IP ADDRESS)
To configure DIR-600 manually connect your computer to the DIR-600 using the ethernet cable
provided. Then connect the power cable on the DIR-600. The power light will display as solid green.
Then simply open a browser window and enter the IP address in the browser address field:
DIR-600 DIR-300 DIR-607
Step 1
Position your router close to your modem and the computer that is
already online. Place this router in an open area of your intended
work area for better wireless coverage.
Step 2
Unplug the Ethernet cable from your modem that is connected to
your computer. Plug it into the black port labled 1 on the back of
your router. The router is now connected to your computer.
Plug one end of the included Ethernet cable that came with your
router into the yellow port labeled INTERNET on the back of the
router. Plug the other end of this cable into the Ethernet port on your
modem.
Step 3
Connect the supplied power adapter into the power port on the back
of the router and then plug into a power outlet or surge protector.
Verify the power light is lit.
Step 4
From the computer you connected to the router, open a web browser
and enter "http://192.168.0.1". Then, press Enter and you will be
directed to the D-Link Setup. Wizard page and follow the on-screen
instructions to configure your D-Link router.
IP ADDRESS:
http://192.168.0.1
USERNAME:
Admin
PASSWORD:
[blank]
3
Advertisement
Table of Contents
