Replacing Drives; Replacing A Hard Drive; Removing A Hard Drive - HP ProOne 600 G3 21 inch All-in-One Business PC Hardware Reference Manual

Table of Contents

Advertisement

Replacing drives

Replacing a hard drive

The 2.5 inch primary hard drive is installed on the left side of the computer on top of the optical disc drive
(ODD). To locate the hard drive on the system board, see

Removing a hard drive

1.
Remove the access panel.
For instructions, see
2.
Pull the hard drive latch away from the hard drive (1) to release the drive.
3.
Slide the hard drive toward the edge of the computer and lift the hard drive out of the drive cage (2).
4.
Disconnect the power and data cables from the hard drive (3).
38
Chapter 3 Hardware repair and upgrade
Removing the computer access panel on page
Locating internal components on page
28.
30.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proone 400 g3 20 inch all-in-one business pc

Table of Contents