Replacing The Optical Disc Drive - HP ProOne 600 G3 21 inch All-in-One Business PC Hardware Reference Manual

Table of Contents

Advertisement

Replacing the optical disc drive

The optical disc drive is located under the hard drive. To locate the optical disc drive on the system board, see
Locating internal components on page
1.
Remove the access panel.
For instructions, see
2.
Remove the hard drive.
For instructions see
3.
Push and hold the green tab (1) while pushing in the green latch (2) at the back of the optical disc drive
enclosure and slide the drive out of the chassis (3).
4.
Pull the green latch off the optical disc drive.
Keep this latch to install on the new optical disc drive.
5.
Align the three pins on the latch with the holes in the new optical disc drive and press the latch firmly
onto the new drive.
NOTE:
Removing the computer access panel on page
Removing a hard drive on page
You must reuse the latch removed from the old optical disc drive.
30.
38.
28.
Replacing drives
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proone 400 g3 20 inch all-in-one business pc

Table of Contents