Table of Contents
Advertisement
Removing an adjustable height stand
To remove the stand:
1.
Remove all removable media, such as optical discs or USB flash drives, from the computer.
2.
Turn off the computer properly through the operating system, then turn off any external devices.
3.
Disconnect the AC power cord from the AC outlet and disconnect any external devices.
4.
Place the computer face down on a soft flat surface. HP recommends that you set down a blanket,
towel, or other soft cloth to protect the bezel and screen surface from scratches or other damage.
5.
Remove the rear port cover, if it is installed. For instructions, see
on page
6.
Press the release latch under the stand (1).
7.
Lift the stand up (2), and then pull the stand hooks out of the computer (3).
14
Chapter 2 Setup
17.
Removing the rear port cover
Advertisement
Table of Contents
