NETGEAR GSS116E User Manual page 31

The Switch Information page displays.
5. Select VLAN.
The Basic Port-based VLAN Status page displays.
6. If this is the first time that you are accessing the Basic Port-based VLAN Status page or if
you are changing the VLAN assignment method, select the Enable radio button and
continue with Step 7.
Otherwise, see Step 9.
A pop-up window opens, informing you that the current VLAN settings will be lost.
7. Click the YES button.
The pop-up window closes.
8. Click the Apply button.
Your settings are saved.
The Basic Port-based VLAN Group table displays.
Note: Models GSS108E and GSS108EPP provide 8 ports. Model GSS116E
provides 16 ports.
9. Under each port to be added to a VLAN, enter the VLAN ID of the VLAN.
For models GSS108E and GSS108EPP, you can enter a VLAN ID from 1 to 8. For model
GSS116E, you can enter a VLAN ID from 1 to 16. If all the VLANs share an uplink to the
Internet or servers, enter all in the VLAN ID field for the port that you want to use for the
uplink.
Note: If ports are members of the same LAG, you must assign them to the
same VLAN.
10. Click the Apply button.
Your settings are saved.
Use VLANS for Traffic Segmentation
8-Port and 16-Port Gigabit Ethernet Plus Click Switch
31 User Manual