Plextor PX-320A User Manual page 47

Troubleshooting: Reading Discs
Symptom Possible Causes
Excessive noise. CD is poorly balanced.
Poorly manufactured
Excessive discs or discs with
vibration. poorly distributed ink on
labeling cause
Slow read significant vibration at
performance. high speeds because
they are out of balance.
Read errors may also
occur.
If the disc label
(especially adhesive
labels) adds more
weight to one area of
the disc than another it
can also cause the disc
to be out of balance.
Can read only "Import previous
the last session session" or a similar
of a multisession feature was not
CD-R or CD-RW enabled when the
disc. multisession disc was
created.
Section 5. Maintenance and Troubleshooting
Solutions
Remove the adhesive label, if
present. Be careful not to damage
the foil underneath.
Clean the disc as detailed on page
31.
If there is no foreign substance on
the disc, contact the disc
manufacturer for a replacement.
Use CD-R or CD-RW mastering
software to import session(s). Such
features may vary in name
depending on the software being
used. Please refer to the
appropriate manual regarding this
feature.
PlexCombo 20/10/40-12A Installation and Users Manual
41