Plextor PX-320A User Manual page 20

Section 2. Installing Your PlexCombo
Before PlexCombo Installation
B Hard disk connected as Master
device, and CD-ROM or DVD-ROM
drive connected as Slave on the
primary IDE port; nothing connected
to secondary IDE port.
Figure 7. How to Install the PlexCombo If Your Computer Is Originally Set Up in
Before PlexCombo Installation
C Hard disk connected as Master
device on primary IDE port; nothing
connected to secondary IDE port.
Figure 8. How to Install the PlexCombo If Your Computer Is Originally Set Up in
14
PlexCombo 20/10/40-12A Installation and Users Manual
How to Install the PlexCombo
Set the PlexCombo's mode jumper
to Master, and connect the
PlexCombo as Master to secondary
IDE port.
Configuration B
How to Install the PlexCombo
Set the PlexCombo's mode jumper
to Master, and connect the
PlexCombo as Master to secondary
IDE port.
Configuration C