Plextor PX-504A Installation And User Manual page 38

Appendix A: PX-504A Specifications
Rear Panel
Power Supply
Typical standby current
Typical read current
(CD 17-40X)
Typical DVD write
current (DVD+R 4X)
Typical CD write current
(CD-R 16 X)
Typical pause current
(CD 4-10X CAV)
Peak current
IDE Interface Connector IDE bus, 40-pin flat ribbon type. Interface complies with
ATA/ATAPI-5. Maximum total cable length cannot
exceed 18 in (45.7 cm).
Analog Audio Output Stereo analog output, Molex connector (L*G*G*R),
MPC-3 standard:
S
S
S
S
S
S
S
* Not confirmed at time of printing
Digital Audio Output Digital audio output for input to SPDIF or Digital-In input
Mode Jumper Master (default), slave, cable select (CSEL)
DVD Regional Setting
Compatibility RPC phase-2-compatible
Changing regional Max. 5 times
setting
32
PX-504A Installation and Users Manual
DC +12V,
+/-10%
130 mA
700 mA
500 mA
430 mA
260 mA
1.4 A
Output voltage (max. volume): 0.75V( rms) +/- 3dB
Load impedance: 10 k ohms
S/N ratio: Min. 75dB
Total harmonic distortion + noise: Max. 0.1% (1kHz)
Dynamic range: Min. 75dB (1kHz)*
Channel separation: Min. 70dB (1kHz)*
Frequency characteristic: 20Hz to 20kHz (0dB +-3dB)
DC +5V,
+/-5%
55 mA
480 mA
530 mA
700 mA
940 mA
1.1 A