What's In The Box; Save Your Box - Plextor PX-504A Installation And User Manual

Section 1. Getting Started

What's In the Box

What you find in your Plextor box depends on what the company that sold you the
box put in—or took out—while the Plextor drive was in their possession.
Plextor currently sells its drive in this configuration:
• PX-504A DVD+R/RW and CD-R/RW drive
• 40-pin IDE ribbon cable
• 4 mounting screws
• Extra jumper
• Emergency eject tool
• 1 piece of approved CD-R media
• 1 piece of approved DVD+R media
• Plextor CD with bundled software for writing DVDs and CDs
• PX-504A Installation and Users Guide
If the security sticker on top of your
box is cut, there may be a good
reason: for example, a dealer may
have added other components or
software. Carefully check the
contents to ensure nothing has been
removed. If something is missing,
contact the party from whom you
purchased the box for an explanation.
NOTE: This applies to the Plextor
retail box. Your drive may have been
shipped in a different box with other
contents, depending on whom you
purchased the drive from and what
they included inside the box.
If your drive came pre-installed, some or all of the items above may have been
installed and may not be separately available. See the Plextor web site for locations
to purchase additional or replacement accessories.
4
PX-504A Installation and Users Manual

Save Your Box!

Be sure to save the box after you have
installed your drive. The box and its
packaging material were designed and
drop tested to ensure your can endure
rough treatment and still arrive in
working order. If you have to ship your
drive back to Plextor, you'll want to
send it in the original box. (For more
details about returning your drive to
Plextor, see page 36.)