Plextor PX-504A Installation And User Manual page 20

Section 2. Installing Your PX-504A
Before PX-504A Installation
B Hard disk connected as Master
device, and CD-ROM or DVD-ROM
drive connected as Slave on the
primary IDE port; nothing connected
to secondary IDE port.
Figure 7. How to Install the PX-504A If Your Computer Is Originally Set Up in
Before PX-504A Installation
C Hard disk connected as Master
device on primary IDE port; nothing
connected to secondary IDE port.
Figure 8. How to Install the PX-504A If Your Computer Is Originally Set Up in
14
PX-504A Installation and Users Manual
How to Install the PX-504A
Set the mode jumper to Master, and
connect the PX-504A as Master to
secondary IDE port.
Configuration B
How to Install the PX-504A
Set the mode jumper to Master, and
connect the PX-504A as Master to
secondary IDE port.
Configuration C