11
SERVICE WORK ON THE CHASSIS
11.41
Checking the frame
11.42
Checking the swingarm
11.43
Checking the throttle cable routing
x
–
Check the frame for cracking and deformation.
»
If the frame exhibits cracking or deformation due to a mechanical impact:
–
Change the frame.
401340-01
x
–
Check the swingarm for damage, cracking, and deformation.
»
If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
401341-01
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
Main work
–
Check the throttle cable routing.
Both throttle cables must be routed side by side behind the handlebars and
above the fuel tank bearing to the throttle valve body.
»
If the throttle cable is not routed as specified:
–
Correct the throttle cable routing.
101363-10
Finishing work
–
Install the fuel tank.
–
Mount the seat. (
x
Info
A frame that has been damaged due to a mechanical impact must
always be changed. Repair of the frame is not authorized by KTM.
x
Info
A damaged swingarm must always be changed. Repair of the
swingarm is not authorized by KTM.
p. 55)
(
p. 59)
x
x
(
p. 60)
p. 56)
66