First Setup - Planar PLL2210MW User Manual

First Setup

Congratulations on your purchase of this high performance LED monitor.
This LED Monitor comes with the following accessories :
• LED Monitor
• Power Cable
• VGA Cable (15 pin)
• AC/DC Power Adapter (AC 100~240V Input /
DC 12V Output)
Install the stand base
1. Lay the LED Monitor flat on a table with the LED screen face down. To prevent the monitor
from being scratched, put a piece of soft cloth on the table on which the screen will be set.
2. Unpack the base, one hand hold the monitor, the other hand attach the base to the stand.
3. Stand the LED Monitor up.
Disconnecting the stand base
1. Lay the LED Monitor flat on a table with the LED screen face down. To prevent the LED Monitor
from being scratched, put a piece of soft cloth on the table on which the screen will be set.
2. Hold the monitor down with one hand. With the other hand, use two fingers to press the
hooks down as directed below.
3. Remove the base from the stand.
• Audio Cable
• User's Guide
• Base
• DVI Cable (24 pin)
3