Planar PLL2710W User Manual

Planar PLL2710W User Manual

Led lcd monitor

Advertisement

PLL2710W
LED LCD Monitor
USER'S GUIDE
www.planar.com

Advertisement

Table of Contents
loading

Summary of Contents for Planar PLL2710W

  • Page 1 PLL2710W LED LCD Monitor USER'S GUIDE www.planar.com...
  • Page 2: Table Of Contents

    Front View of the Product ............................5 Rear View of the Product ............................6 Quick Installation ................................7 Advanced Operation—OSD Menu ........................10 Supporting Timing Modes ............................13 Technical Information............................... 14 Wall-Mount Installation Instructions........................15 Care and Maintenance.............................. 16 Troubleshooting................................16 Planar Support................................16...
  • Page 3: Operation Instructions

    According to WEEE regulation, this LED LCD Monitor can't be handled as normal trash in Europe when it is out of usage. Please refer to the recycle information on Planar’s website to handle it. For more information on how to recycle your product, please visit WWW.PLANARSYSTEMS.COM/GREEN...
  • Page 4: Safety Precautions

    Safety Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit.  Turn off the product before cleaning.  LED Display screen surface may be cleaned using a soft clean cloth moistened with mild window glass commercial cleaners or 50/50 mixture of water and isopropyl alcohol.
  • Page 5: Package Overview

    Package Overview Congratulations on your purchase of this high performance edge lit LED LCD monitor. This LED LCD Monitor comes with the following accessories: LED LCD Monitor Base Power Cord VGA Signal Cable User’s Guide...
  • Page 6: First Setup

    First Setup Install the stand base 1. Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the monitor from being scratched, put a piece of soft cloth on the table on which the screen will be set.
  • Page 7: Front View Of The Product

    Front View of the Product ① ② ③ ④ ⑤ ① OSD Turn On/ Off ② Contrast/Brightness /Scroll Down/Adjust Decrease ③ Preset Mode/Scroll Up/ Adjust Increase ④ Confirm Select /Input select/Auto adjust ⑤ Power ON/OFF/ LED Indicator...
  • Page 8: Rear View Of The Product

    Rear View of the Product ① ② ③ ① Power Input ② DVI Input (DVI 24 pin) ③ VGA Input (D-Sub 15 pin)
  • Page 9: Quick Installation

    Quick Installation Connect either VGA or DVI Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. Connect power cord to a properly grounded AC outlet, and then to the monitor. Power-ON computer and then POWER-ON the monitor. Set the timing mode on your computer.
  • Page 10: Basic Operation

    Basic Operation Before using the LED LCD Monitor:  Connect external equipment properly.  Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the LED LCD Monitor on/off: Press Power button on the front of LED LCD Monitor. The power LED indicator light will be blue when the LED LCD Monitor is on.
  • Page 11 Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the ▼ button for 3 seconds to lock all 5 buttons. The LED LCD Monitor will show a “Locking Power Button” message for 5-10 seconds and the message will disappear automatically.
  • Page 12: Advanced Operation-Osd Menu

    Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your LED LCD Monitor. Press the 1 button to display the OSD Menu, and use ▼ or ▲ to select the desired OSD menu. Short Cuts Function from the button(s) Auto Image Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H.
  • Page 13 6500K: Adds red to screen image for warmer white and richer red. 5400K: Adds green to screen image for a darker color. User Color: Individual adjustments for red (R), green (G), blue (B). 1. Press button 2 to select the desired color. 2.
  • Page 14 Press ▲ or ▼ button to select between horizontal and vertical OSD OSD Position: Position adjustment. H. Position: To horizontally adjust the OSD position. ▲: move OSD to the right, ▼: move OSD to the left. V. Position: To vertically adjust the OSD position. ▲: move OSD up, ▼: move OSD down.
  • Page 15: Supporting Timing Modes

    Supporting Timing Modes STANDARD RESOLUTION 720 x 400 @ 70Hz 640 x 480 @ 60Hz 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA...
  • Page 16: Technical Information

    Technical Information Panel 27” TFT (with LED backlight) Power Management On: 30 Watts (typical), 40 Watts (maximum) Standby Mode: < 0.5 Watt Off: < 0.5 Watt Displayable Resolution Full HD 1920 x 1080 max. Vertical Frequency 60Hz max. Pixel Dimension 0.3114 x 0.3114 mm Display Color 16.7M...
  • Page 17: Wall-Mount Installation Instructions

    Wall-Mount Installation Instructions Preparing To Install The Optional Wall Mount Arm (not included) This LED LCD Monitor can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then disconnect the cables from the LED LCD Monitor before performing the procedure below.
  • Page 18: Care And Maintenance

     If any colors (red, green, blue) are missing, check the video cable to make sure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection.  Connect the LED LCD monitor to another computer. Planar Support Planar Support Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.
  • Page 19 2013 P/N:2001171358T...

Table of Contents