OSD Lock Out Function ............................... 11 Advanced Operation—OSD Menu ......................... 13 Supporting Timing Modes ............................16 Technical Information ..............................17 Wall-mount instruction............................... 18 Care and Maintenance ..............................19 Troubleshooting ................................19 Planar Support ................................20...
Operation Instructions Thank you for purchasing the PLL2250MW LED LCD monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LED LCD Monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 4
COMMUNIQUE D’AVERTISSEMENT DE LA FCC CONCERNANT LES INTERFERENCE DE FREQUENCE RADIO: (SEULEMENT POUR MODELES CERTIFIE PAR LA FCC) Ce moniteur a été testé et à été trouvé conforme aux limites pour un appareil numérique de Classe B, suivant la partie 15 des règlements de la FCC. Ces limites ont été développées pour o rir une protection satisfaisante contre les interférences nuisibles dans une installation résidentielle.
Unpacking Instructions Move the LED Monitor out of the package and take o the plastic bag and Polystyrene Foam. Remove base from plastic bag and attach to base. Adjust the Panel between -5° leaning forward and 15° leaning backward. Safety Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit.
Consignes de sécurité Respectez tous les avertissements, les précautions et conseils d’entretien recommandés dans ce manuel de l’utilisateur pour maximiser la durée de vie de votre appareil. A faire : Éteindre le produit avant de le nettoyer. La surface de l'écran tactile peut être nettoyée avec un chi on doux et propre imprégné d’un nettoyant doux du commerce pour vitres ou d'un mélange à...
Page 8
First Setup Installing the Stand Base 1. Lay the LED LCD Monitor at on a table with the LED screen face down. To prevent the LED LCD Monitor from being scratched, put a piece of soft cloth on the table on which the screen will be set.
Page 9
Front View of the Product OSD Menu On/O Brightness*/ Scroll Down/ Adjust Decrease Blue Light Reducer* / Scroll Up/ Adjust Increase Input Select/ Con rm Select Power On/O LED Indicator . * Hot keys Instructions please see “Using the OSD Menu” on page 11.
Quick Installation 1. Connect either VGA or HDMI Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. 2. Connect the audio cable from audio output of computer to the audio input of the monitor. 3.
Basic Operation Before using the LED LCD monitor: Connect external equipments properly. Insert the power plug, and the power LED indicator will light orange. Power On/O To turn the LED LCD monitor on/o : Press button on the front of LED LCD monitor. The power LED indicator lights blue when the LED LCD monitor is on.
Page 13
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the ▼ button for 3 seconds to lock all 5 buttons. The LED Monitor will show a “Lock Out” message for 3 seconds and the message will disappear automatically.
Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your LED LCD monitor . Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu. Short Cuts Function from the button(s) AUTO IMAGE ADJUST: To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H.
Page 15
OVER DRIVE: Allows the user to change the Over Drive strength. Improve the quality of the motion pictures. INPUT SELECT: When Input Select is pressed, change Input signal to VGA, HDMI, or Auto. AUDIO ADJUST: To adjust the audio functions. VOLUME: To adjust the volume of speaker output.
Page 16
MANUAL IMAGE ADJUST: To manually adjust the HORIZONTAL SIZE, H. /V. POSITION, FINE TUNE and SHARPNESS. H./V. POSITION: To adjust the horizontal and vertical position of the video. HORIZONTAL POSITION: ▲: move screen to the right, ▼: move screen to the left. VERTICAL POSITION: ▲: move screen up, ▼: move screen down.
Supporting Timing Modes STANDARD RESOLUTION 720 x 400 @ 70Hz 640 x 480 @ 60Hz 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA...
Technical Information Technical Speci cation Panel 21.5” TFT (with LED backlight) Power Management Normal On: 16 Watts (typical), 19 Watts (maximum) ECO Mode 1 On: 18 Watts (typical) ECO Mode 2 On: 15 Watts (typical) ECO Mode 3 On: 12 Watts (typical) Standby Mode: <...
Wall-mount instruction Preparing To Install The Optional Wall Mount Arm (not included) This LED LCD Monitor can be attached to a wall mounting arm purchased separately. Turn the power OFF then disconnect the cables from the LED LCD Monitor before performing the procedure below. 1.
Care and Maintenance Care Avoid exposing your LED LCD monitor directly to sunlight or other heat source. Place your LED LCD monitor away from the sun to reduce glare. Put your LED LCD monitor in a well ventilated area. ...
Planar Support Cables and Accessories To nd cables and accessories for your Planar monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com Technical Support Visit Planar at http://www.planar.com/support for operations manuals, touchscreen drivers, warranty information and access to Planar's Technical Library for online trouble shooting.