Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Planar PLL2210MW
Summary of Contents for Planar PLL2210MW
- Page 1 PLL2210MW LED Monitor USER'S GUIDE www.planar.com...
-
Page 2: Table Of Contents
Content Operation Instructions...1 Safety Precautions...2 First Setup...3 Front View of the Product ...4 Rear View of the Product ...5 Quick Installation ...6 Basic Operation...7 Advanced Operation—OSD Menu...9 Supporting Timing Modes ... 12 Technical Information ... 13 Wall-mount instruction ... 14 Care and Maintenance... -
Page 3: Operation Instructions
FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LED Monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation. -
Page 4: Safety Precautions
This LED Monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to the LED Monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. -
Page 5: First Setup
Disconnecting the stand base 1. Lay the LED Monitor flat on a table with the LED screen face down. To prevent the LED Monitor from being scratched, put a piece of soft cloth on the table on which the screen will be set. -
Page 6: Front View Of The Product
Front View of the Product ① OSD Turn On/ Off ② Volume Adjust/ Scroll Down/ Adjust Decrease ③ Preset Mode/ Scroll UP/ Adjust Increase ④ Input select/ Confirm Selection ⑤ Power On/Off / LED Indicator ① ② ③ ④ ⑤... -
Page 7: Rear View Of The Product
Rear View of the Product ⑥ Power input (+12V DC in) ⑦ Audio Input ⑧ DVI Input (DVI 24 pin) ⑨ VGA Input (D-Sub 15 pin) ⑥ ⑦ ⑧ ⑨... -
Page 8: Quick Installation
Quick Installation 1. Connect either VGA or DVI Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. 2. Connect the audio cable from audio output of computer to the audio input of the monitor. -
Page 9: Basic Operation
Option 1: OSD lock – all 4 buttons are locked except the “POWER” button. Press and hold the 1 button and the ▲ button for 3 seconds to lock the OSD buttons. The LED Monitor will show an “OSD Lock Out” message for 5~10 seconds and the message will disappear automatically. - Page 10 Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the ▼ button for 3 seconds to lock all 5 buttons. The LED Monitor will show an “Lock Out” message for 5~10 seconds and the message will disappear automatically.
-
Page 11: Advanced Operation-Osd Menu
Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your LED Monitor. Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu. Short Cuts Function from the button(s) Auto Image Adjust: Tune) and Clock (H. - Page 12 Preset Mode: Provides an optimum display environment depending on the contents displayed. It contains 5 user-selectable presets. Standard is for general windows environment and monitor default setting. Game optimized for PC game environment. Cinema optimized for movie and video environment.
- Page 13 Setup Menu: To set up Language, OSD Position, OSD Time Out and OSD Background. Language Select: To allow users to choose from available languages. Press ▼ or ▲ button to select between horizontal and vertical OSD OSD Position: Position adjustment. H.
-
Page 14: Supporting Timing Modes
STANDARD Note: 1. DVI supports 480i, 480p, 576i, 576p, 720p, 1080i, and 1080p. 2. Simultaneously press 1 and 2 keys on monitor panel to switch between similar PC timings. Similar PC Timing on list below: • 720 x 400 @ 70Hz / 640 x 400 @ 70Hz Warning: Do not set the graphic card in your computer to exceed these maximum refresh rates. -
Page 15: Technical Information
Technical Information Panel Power Management Displayable Resolution Pixel Dimension Display Color Tilt Active Display Area Temperature Compliance Power Speaker 21.5” TFT (with LED backlight) On: 25 Watts (typical), 35 Watts (maximum) Standby Mode: < 0.5 Watt Off: < 0.5 Watt Full HD 1920 x 1080 max. -
Page 16: Wall-Mount Instruction
Preparing To Install The Optional Wall Mount Arm (not included) This LED Monitor can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then disconnect the cables from the LED Monitor before performing the procedure below. -
Page 17: Care And Maintenance
Never remove the rear cover of your LED Monitor cabinet. The display unit inside contains high-voltage parts and may cause electric shock to human bodies. Never try to repair your LED Monitor yourself. Always call your service center or a qualified technician to fix it. -
Page 18: Product Registration And Technical Support
Product Registration and Technical Support Register Your Planar Products Today Thank you choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support/product_registration.html... - Page 19 2001132328P...