Content Operation Instructions..............................1 Safety Precautions ................................2 First Setup...................................3 Front View of the Product.............................4 Rear View of the Product...............................5 Quick Installation ................................6 Basic Operation.................................7 Advanced Operation—OSD Menu..........................9 Supporting Timing Modes ............................12 Technical Information ..............................13 Wall-mount instruction............................... 14 Care and Maintenance..............................15 Troubleshooting................................
Operation Instructions Thank you for purchasing this LED Monitor, a high-resolution multi-scan color LED Monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LED Monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Safety Precautions This LED Monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to the LED Monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. WARNINGS: ...
First Setup Congratulations on your purchase of this high performance LED monitor. This LED Monitor comes with the following accessories : LED Monitor Power Cable User’s Guide Audio Cable VGA Cable Installing the Stand Base 1.
Quick Installation 1. Connect Video cable (VGA cable) Make sure both monitor and computer are powered OFF. Connect the video cable (VGA cable) to the computer, then to the monitor. 2. Connect Power cord Connect the power cord to a properly grounded AC outlet, then to the monitor. 3.
Basic Operation Before using the LED Monitor: Connect external equipments properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the LED Monitor on/off: Press POWER button on the front of LED Monitor. The power LED indicator lights green when the LED Monitor is on.
Page 10
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the ▼ button for 3 seconds to lock all 5 buttons. The LED Monitor will show an “Lock Out” message for 5~10 seconds and the message will disappear automatically.
Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your LED Monitor. Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu. Short Cuts Function from the button(s) Auto Image Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H.
Page 12
6500K: Adds red to screen image for warmer white and richer red. 5400K: Adds green to screen image for a darker color. User Color: Individual adjustments for red (R), green (G), blue (B). 1. Press button 2 to select the desired color. 2.
Page 13
Press ▼ or ▲ button to select between horizontal and vertical OSD OSD Position: Position adjustment. H. Position: To horizontally adjust the OSD position. ▲: move OSD to the right, ▼: move OSD to the left. V. Position: To vertically adjust the OSD position. ▲: move OSD up, ▼: move OSD down.
Supporting Timing Modes STANDARD RESOLUTION 720 x 400 @ 70Hz 640 x 480 @ 60Hz 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA...
Wall-mount instruction Preparing To Install The Optional Wall Mount Arm (not included) This LED Monitor can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then disconnect the cables from the LED Monitor before performing the procedure below.
Care and Maintenance Care Avoid exposing your LED Monitor directly to sunlight or other heat source. Place your LED Monitor away from the sun to reduce glare. Put your LED Monitor in a well ventilated area. Do not place any heavy things on top of your LED Monitor. ...
Product Registration and Technical Support Register Your Planar Products Today Thank you choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support/product_registration.html...