Operation Instructions - Planar PLL2210MW User Manual

Operation Instructions

Thank you for purchasing this LED Monitor, a high-resolution multi-scan color LED Monitor.
Please read this guide thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This LED Monitor has been tested and found compliant with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection
against harmful interference to a residential installation. This LED Monitor generates, uses, and
can radiate radio frequency energy. Harmful interference to radio communication may be led as
a result if it's not properly installed and used. However, there is no guarantee that interference
will not occur in a particular installation. If this LED Monitor does cause serious interference to
radio or television reception, resetting the LED Monitor may determine it. Moreover, users are
encouraged to correct interference by doing one or more of the following:
Reorient or relocate the receiving antenna.
Move the LED Monitor and the receiver further away from each other.
Connect the LED Monitor into an outlet on a circuit different from that to which the
receiver is connected.
Consult your local dealer or an qualified technician.
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized
changes or modifications to this LED Monitor would void the user's authority to operate this
device.
Note: If necessary, shielded interface cables and AC power cord must be used to meet the
emission level limits.
According to WEEE regulation, this LED Monitor can't be handled as normal trash in Europe when
it is out of usage. Please refer to the recycle information from our website to handle it.
1