Volvo Penta TAD1170VE Operator's Manual page 37

ENGINE DATA
Engine Hours
Fuel Rate
Oil Pressure
Oil Temperature
1500
Engine
Speed
P 00 18291
47710925 01-2019 © AB VOLVO PENTA
1536h
112 1/h
425 kpa
65 C
rpm
Menus
ENGINE DATA (ENGINE DATA)
Engine data shown may vary depending on the engine
installation.
• Engine Hours (Engine Hour) (tim)
• Engine Speed (Engine Speed) (rpm)
• Coolant Temperature (Coolant Temperature) (°C)
•
Oil Pressure (Oil Pressure) (kPa)
• Fuel Rate (Fuel Rate) (l/h)
Current fuel consumption.
• Boost Temperature (Boost Temperature) (°C)
• Boost Pressure (Boost Pressure) (kPa)
• Oil Temperature (Oil Temperature) (°C)
DIAGNOSTICS (DIAGNOSTICS)
If the system detects a malfunction, the operator is
informed via a pop-up message on the display. The
fault codes are listed in the diagnostics menu; active
fault codes are at the top of the list and are denoted be
a green dot. For more information regarding cause and
remedies, use the arrow button to scroll to the fault
concerned and press
OK
information about number of engine hours when the
fault became active and the SPN and FMI codes.
SETTINGS (SETTINGS)
Display (Display)
• Set backlight time (Set backlight time). On/OFF,
sets backlight to run in standby mode. On is the
default setting.
• Set backlight brightness (Set backlight
brightness). Adjust display backlight brightness
using the panel arrow buttons.
• Set Instrument Brightness (Set Instrument
Brightness). Sets backlighting in the display
instrument.
• Change background color (Change background
color). Select background color, gray or white.
Language (Language)
Sets the display language; chooses between English,
French, German, Spanish and Chinese.
Instruments and Controls
. This will also provied
35