5.
RS232 Codes
Notes:
•
The examples are written with the command first and the response in italics. Example:
•
Command: ASPECT(ZONE.1)=AUTO
•
Response: ASPECT(ZONE.1):AUTO
•
In many instances, a modifier may be omitted and the display will replace it with a default
value. For example, the default modifier for the ASPECT command is CURRENT, so the
following two commands are identical:
•
ASPECT(CURRENT)=AUTO
•
ASPECT=AUTO
•
'!' in the Operators column indicates that the command accepts the execute operator,
which uses no operator symbol. The '!' symbol is not included in the command.
Planar UltraRes P Series RS232 User Manual
020-1408-02A
9
Page | 9