Table of Contents
Advertisement
Notice the following in the UDP example below using Hercules:
•
The IP address is 10.15.0.67
•
Port 57 is selected
•
"444953504C41592E504F5745523D310D" in the Send box is hex for
"DISPLAY.POWER=1"
Note: Most UDP terminal programs won't automatically send the [CR] at the end of the
command, so the hex command is used to do this manually.
Planar UltraRes P Series RS232 User Manual
020-1408-02A
70
Page | 70
Advertisement
Table of Contents
