Rs232 Codes - Planar RS232 User Manual

RS232 Codes

Notes:
• The examples are written with the command first and the response in italics.
Example:
• Command: ASPECT(ZONE.1)=AUTO
• Response: ASPECT(ZONE.1):AUTO
• In many instances, a modifier may be omitted and the display will replace it
with a default value. For example, the default modifier for the ASPECT
command is CURRENT, so the following two commands are identical:
• ASPECT(CURRENT)=AUTO
• ASPECT=AUTO
• '!' in the Operators column indicates that the command accepts the execute
operator, which uses no operator symbol. The '!' symbol is not included in the
command.
Planar UltraRes Series RS232 User Manual
RS232 Codes
9