Planar GX40 User Manual page 118

40" direct-view lcd panel
Table of Contents

Advertisement

Menu Item
Retry on Lost Signal
Do Black/White Levels
Do Frequency
Do Phase
Do Position
The checked events in Auto Setup Options occur when
• the input changes, such as from XGA to UXGA
• a new source is selected
• you press the
button.
SETUP
For more information, see "Auto Setup Options" on page 62
113
Auto Setup Options
Retry on lost signal, when checked, means the unit will attempt to find a different signal when it
detects a change in syncs. This should normally be checked. If a signal is very noisy, you may
want to uncheck this box to avoid the image flashing when it receives bad syncs. However, when
unchecked, the unit will never detect when a signal goes away or changes to a different resolu-
tion. (sync)
Do Quick Black/White Levels automatically adjusts the lightest and darkest pixels to be white
and black. This fully automatic method is prone to small errors in the white level. Semi-automatic
level adjustment is better. For more information, see "Adjusting Levels for Analog Sources" on
page 27
Automatically adjust the frequency, phase, and position, respectively, of the image to optimal val-
ues based on the image it detects. If the incoming image is all black at the time it is first received,
the unit will not be able to make these settings effectively. It must have some content to work with
to adjust frequency and phase and it must have an edge-to-edge, non-black image to adjust
position
Description

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sn-4035-wx

Table of Contents