Table of Contents
Advertisement
Menu Option/
Setting
Source
The type of input: Analog, Component (YPbPr), S-Video, or Composite
Colorspace
The colorspace of the input, either RGB or YPbPr
Resolution
The image resolution. From 800 x 600 up to the unit's native resolution
Wall
When Wall Mode is enabled (see "Aspect Ratio and Wall" on page 89, the first set of
numbers are the size of the array and the second set are the unit's position in the array,
column first, then row
Scale/Justify
The value for Scale Mode value (from Main > Aspect Ratio & Wall > Scale Mode) and
the value for Justify (from Main > Aspect Ratio & Wall > Justify) for this memory slot
Position/Overscan
The position and amount of overscan of the image on the screen
Zoom UL/LR
The zoom adjustment settings (see "Size and Position > Picture Position" on page 87)
Viewport UL/LR
The viewport adjustment settings (see "Size and Position > Picture Position" on
page 87)
Frequency/Phase
The frequency and phase settings (see "Picture > Source (Analog)" on page 81)
Sharpness
The sharpness setting (see "Picture > Source (Analog)" on page 81)
Black Level
The values for red, green, and blue that define the Black and White levels for this set-
White Level
ting. (RGB signals). Range is 0-255
Brightness
The brightness of the image. (Composite, S-Video, Component or YPbPr signals only).
Range is 0-255
Contrast
The contrast (ratio between white and black areas) of the image (Composite, S-Video,
Component or YPbPr signals only). Range is 0-255
Saturation/Hue
The saturation and hue settings (Composite, S-Video, Component or YPbPr signals)
101
Setup Summary Settings
Description/Settings/Values
Advertisement
Table of Contents
