Planar GX40 User Manual page 93

Menu Item
Picture Position
Horizontal Position
Vertical Position
Zoom Window Top & Left
Zoom Window Bottom & Right
Viewport Window Top & Left
Viewport Window Bottom & Right
Reset All Windows to Default
Size & Position Menu Options
Description
The position of the Default value and range depends on the incoming signal
image relative to the Picture position is automatically adjusted during setup based
sync signal on where the edge of the image is found (see "Advanced
Options > Auto Setup Options" on page 112).)
When this option is Pressing - moves the image to the left
selected, you can Pressing + moves the image to the right
move the image hori-
zontally using the -/+
buttons.
When this option is Pressing - moves the image down
selected, you can Pressing + moves the image up
move the image verti-
cally using the -/+
buttons.
Zoom adjusts the size of the picture. In Zoom Top & Left, the up-down arrows move
the top edge, and the right-left arrows move the left side
Viewport shrinks the picture. This feature is most useful when each unit in a wall is
fed a separate picture from a video processor. In such a case, you can't zoom the pic-
ture smaller, but you can shrink the picture with Viewport
Reset All Windows to Default makes all Zoom and Viewport values zero. If Big Picture
is being used and Wall Mode is on, the Zoom values go to the Big Picture defaults
Setting(s)
88