Connecting The Display - Planar Dome E2 Quick Reference Manual

Connecting the Display

Use only the cable and power cord supplied with the Dome EX display.
To connect the display
1 Press the PUSH button on the
desk stand and remove the stand
cover.
2 Plug one end of the DVI cable into
the DVI connector port. Tighten
the thumbscrews to secure the
connection.
3 Plug the power cord into the power
input port.
4 Plug the other end of the DVI cable
into the video port on the installed
display controller. Use DVI port #1
to install only one display.
5 Plug the other end of the power
cord into a grounded outlet.
6 Thread the cable and cord through
the stand column and reattach the
stand cover.
7 Power on your display fi rst, then
the computer.
6
Power cord DVI cable