EVGA X299 Micro ATX 2 (121-SX-E296)
3. Once you have verified there are no detection/driver
installation issues with the cards, you can enable SLI.
Right-click on the desktop and select "NVIDIA Control
Panel" ("NCP").
Next, select "Configure SLI, Surround, PhysX" under the
"3D Settings" menu. The default is "Disable SLI."
To enable SLI, click "Maximize 3D Performance," circled in
red below, and click "Apply" at the bottom.
Before you can enable SLI, the NCP may ask you to close certain programs and
processes; you cannot continue further until this is completed.
- 94 -