EVGA X299 Micro ATX 2 Installation Manual page 72

EVGA X299 Micro ATX 2 (121-SX-E296)
RAID5, can take several hours to rebuild. The duration of the rebuild process will
further increase based on the usage of both the array and the CPU during the process.
The rebuild process can be monitored from the "Intel Rapid Storage Technology"
®
utility in Windows, which is effectively the software front-end for the Intel SATA
®
controller. The rebuild status can be viewed in the "Manage" tab, located on the top of
the IRST Window. Please see the image at the top of Page 79 to see an example of
where to find the rebuilding % in the IRST.
IRST (Intel ® Rapid Storage Technology)
The IRST is the software front-end for the Intel SATA controller. It is recommended
®
to install the IRST drivers after installing the Intel Chipset Drivers – the main
®
motherboard drivers. This guide walks you through not only the building, but also the
repairing of an array from within Windows, since it may be more convenient to build
new arrays within the OS rather than from within the UEFI. All forms of RAID that
can be built in the UEFI are available in IRST; the IRST may be more convenient for
some people due to a more detailed UI than the UEFI.
- 72 -