EVGA X299 Micro ATX 2 Installation Manual page 73

EVGA X299 Micro ATX 2 (121-SX-E296)
This guide will illustrate how to create a RAID1 array using the IRST. Using the screen
above, we know that three (3) SSDs are currently attached to the controller and the
other three (3) Intel SATA ports are empty (this can vary board to board based on how
®
many Intel SATA ports are present). If you plan to create another type of array, please
®
ensure that you have the correct number of drives attached and shown on the status
screen in IRST for your intended array before you start.
Referring to the above image, again, locate and click the hyperlink halfway down the
window that says "Create a Custom Volume." An array creation window will open:
- 73 -