EVGA X299 Micro ATX 2 Installation Manual page 71

EVGA X299 Micro ATX 2 (121-SX-E296)
Next, you will see a list of all attached HDD/SSDs that can be used to rebuild the array.
Select the disk, then click on it or press enter.
Once the process has started you will see the status change to "Rebuilding."
**Important Notice**: The controller will not begin the rebuilding process until you
have booted back into Windows; this queues the rebuild but does not start the process.
The rebuilding duration will vary. Fast drives in uncomplicated arrays with small
amounts of data can rebuild very quickly. Large platter drive-based arrays, especially in
- 71 -