Sound Functions - tams elektronik 30 plus Series Manual

Locomotive decoders of the series 30 plus

Dimming depending on the speed level: The voltage will be dimmed
depending on the speed level. This enables weak smoke generation
during halts or a switched off or dimmed cab lighting while the train is
moving.

MARslight (= light intensity going up and down): Example of use:
american locomotives with this type of lighting.
Servo output (except LD-G-31 plus)
The decoders LD-G-33 plus, LD-G-34 plus and LD-G-36 plus have an
output sending the signals to control a servo. The voltage supply for
the servo cannot be provided by the decoder. For that reason an
external voltage supply (e.g. servo PCB item-no. 70-05900) is required.
The servo is controlled by:

setting the end positions via CVs and controlling by pushing the
function keys ("on" = end position 1 , "off" = end position 2) or

input of a value for the folding square by POM, which allows to
approach to any folding square.

4.4. Sound functions

SUSI interface (except LD-G-31 plus)
A SUSI module can be connected to the locomotive decoders LD-G-33
plus, LD-G-34 plus and LD-G-36 plus and read out, programmed and
controlled via the decoder.
The decoder transmits the function status and the speed level set at the
central unit, to the SUSI module. This affects the SUSI module´s
outputs depending on the speed level (e.g. motor sound). The decoder
allows the setting of the acceleration and braking delay so that the
functions depending on the speed level correspond to the driving
characteristics during accelerating and braking.
English
Page 17