Sound Functions; Releasing The Functions - tams elektronik FD-R Extended Series Manual

FD-R Extended

4.3. Sound functions

SUSI interface
A SUSI module can be connected to the FD-R Extended and read out,
programmed and controlled via the decoder.
The function decoder transmits the function status and the speed level
set at the central unit, to the SUSI module. This affects the SUSI
module´s outputs depending on the speed level (e.g. motor sound).
The FD-R Extended allows the setting of the acceleration and braking
delay so that the functions depending on the speed level correspond to
the driving characteristics during accelerating and braking.
Integrated sounds
Four integrated sounds are available:

train conductor´s whistle,

door´s bleeping when closing,

bell,

signal horn.

4.4. Releasing the functions

The function outputs, the servo output and the integrated sounds can
be released by:

pushing the function keys and / or

automatically via the switching inputs (except SUSI module). The
switching inputs are released via external contacts, e.g. via reed
contacts or Hall sensors in combination with permanent magnets in
the rails.
The sounds of a connected SUSI module can be triggered by the
function keys as well as by the switching inputs that are assigned to
these function keys.
English
Page 13