Safety Instructions - tams elektronik 30 plus Series Manual

English
As a clock generator for the sound locomotive decoder LD-G-36 plus
(e.g. to control the correct syncronisation of the steam discharge with
the wheel movements):

reed contacts 1 x closing contact (e.g. item-no. 84-53110)

and / or Hall-sensors (e.g. item-no. 84-53210) and

permanent magnets (e.g. neodymium magnets Ø 3mm, thickness =
2mm, item-no. 84-53990).
If you want to connect the decoder to an a.c. motor:

a load control adapter LRA (item no. 70-02105 or 70-02106) or

a permanent magnet (e.g. item no. 70-04100, 70-04200 or 70-
04300) or

a motor modification set (e.g. item no. 70-40110, 70-40210 or
70-40310).

2. Safety instructions

Caution:
!
Integrated circuits (ICs) are inserted on the decoder. They are
sensitive to static electricity. Do not touch components without first
discharging yourself. Touching a radiator or other grounded metal part
will discharge you.
Mechanical hazards
Cut wires can have sharp ends and can cause serious injuries. Watch
out for sharp edges when you pick up the PCB.
Visibly damaged parts can cause unpredictable danger. Do not use
damaged parts: recycle and replace them with new ones.
Page 8
Locomotive decoders of the series 30 plus