Naming Station Presets; Listening To Station Presets - Pioneer VSX-D412K Operating Instructions Manual

Using the tuner

Naming station presets

For easier identification, you can name your
station presets.
1 Choose the station preset you want to
name.
See Listening to station presets (this page) for
how to do this.
2 If you're using the remote control,
press RECEIVER (VSX-D412 only).
3 Press TUNER EDIT (T. EDIT on the VSX-
D512 remote).
The display shows ST. NAME, then a blinking
cursor at the first character position.
4 Input the name you want.
Names can be up to four characters long.
• Use the front panel MULTI JOG/INPUT
SELECTOR dial or the remote control } ]
buttons to select characters.
• Press ENTER to confirm a character. If no
character is input, a space is input.
• The name is stored when ENTER is
pressed after choosing the fourth character.
To erase a station name, simply repeat steps
1-3 and input four spaces instead of a name.
Once you have named a station preset, you
can press DISPLAY when listening to a
station to switch the display between the
name and the frequency.

Listening to station presets

Having stored up to 30 stations (see previous
page), preset stations can be easily recalled.
1 Press the TUNER button on the remote
control to select the tuner.
2 Press CLASS to select the class in which
the station is stored.
Press repeatedly to cycle through classes A, B
and C.
3 Press STATION +/– (ST +/– on the VSX-
D512 remote) to select the station preset
you want.
• If the receiver is left disconnected from the
AC power outlet for an extended period, the
station memories will be lost and will have to
be reprogrammed.
07
43
En