Using The Tuner; Listening To The Radio - Pioneer VSX-D412K Operating Instructions Manual

07

Using the tuner

Listening to the radio

The following steps show you how to tune to FM
and AM radio broadcasts using the automatic
(search) and manual (step) tuning functions.
Once you are tuned to a station you can
memorize the frequency for recall later—see
Saving station presets on the next page for more
on how to do this.
VSX-D412
TUNER
TUNING
BAND MPX
1 Press the TUNER button on the remote
control to select the tuner.
2 Use the BAND button to change the
band (FM or AM), if necessary.
Each press switches the band between FM and
AM.
40
En
3
VSX-D512
TUNER
MASTER
VOLUME
TUNE
TUNE
BAND DTV ON/OFF
MPX
Tune to a station.
There are three ways to do this:
Automatic tuning
To search for stations in the currently
selected band, press and hold the tuning
buttons ( TUNING (VSX-D412)/ TUNE (VSX-
D512) + / –) for about a second. The
receiver will start searching for the next
station, stopping when it has found one.
Repeat to search for other stations.
Manual tuning
To change the frequency one step at a
time, press the tuning buttons ( TUNING
(VSX-D412)/ TUNE (VSX-D512) + / –).
High speed tuning
Press and hold the tuning buttons (
TUNING (VSX-D412)/ TUNE (VSX-D512)
+ / –) for high speed tuning. Release the
button at the frequency you want.