Display - Pioneer VSX-D412K Operating Instructions Manual

04 Controls and displays

Display

1
SIGNAL
DIGITAL
ANALOG DTS
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal
assigned for the current component:
AUTO : Lights when AUTO signal select is on.
DIGITAL : Lights when a digital audio signal is
detected.
2 DIGITAL : Lights when a Dolby Digital signal
is detected.
ANALOG : Lights when an analog signal is
detected.
DTS : Lights when a source with DTS audio
signal is detected.
2 DTS
When the Standard mode of the receiver is on,
this lights to indicate decoding of a DTS signal.
3 2 DIGITAL
When the Standard mode of the receiver is on,
this lights to indicate decoding of a Dolby
Digital signal.
4 2 PRO LOGIC II
When the Standard mode of the receiver is on,
this lights to indicate Prologic II decoding.
28
En
2
AUTO
DIGITAL
DIGITAL PROLOGIC
ADV.SURR.
10
4 5 6
3
ATT DIRECT
MIDNIGHT
LOUDNESS
11
12
5 ATT
Lights when INPUT ATT is used to attenuate
(reduce) the level of the input signal (can only
be used with an analog signal).
6 DIRECT
Lights when source direct playback is in use.
Direct playback bypasses the tone controls and
channel levels for the most accurate reproduc-
tion of a source.
7 MIDNIGHT
Lights during Midnight listening.
8 MONITOR
Lights when MONITOR is selected.
9 Speaker indicator
Shows if the speaker system is on or not.
SP 3A means speakers are switched on. SP 3
means the headphones are connected.
10 Character display
11 ADV. SURR. (Advanced Surround)
Lights when one of the Advanced Surround
listening modes of the receiver is selected.
7 8
9
MONITOR
STEREO TUNED
MONO SP
13
14
A
dB