Listening To Surround Sound - Pioneer VSX-D412K Operating Instructions Manual

5 minute guide

Listening to Surround Sound

This receiver was designed with the easiest possible setup in mind, so with the following quick
setup guide, you should have your system hooked up for surround sound in no time at all. In most
cases, you can simply leave the receiver in the default settings.
1 Hook up your DVD player.
For surround sound, you'll want to hook up using a digital connection from the DVD player to the
receiver. You can do this with either a coaxial, or an optical connection (you don't need to do both). If
you hook up using an optical cable, you should refer to Optical digital input setting on page 38 to
assign the optical input to DVD.
Use a video cord to connect the video output on your DVD to the receiver using the jacks shown
below.
2 Hook up your TV.
Use a video cord to connect your receiver to the TV using the jacks as shown below.
Optical cable
Note: If you hook up
using a optical cable,
see Optical digital
input setting on page
38 to assign the
optical input to DVD.
DIGITAL OUT
4 1 ¡ ¢
STANDBY/ON
0
DVD player
TV
Coaxial cable
Video cord
VIDEO OUT
S
DVD PLA YER
7 8 Î
3
VIDEO IN
ASSIGNABLE
COAX
¥
(DVD/LD)
IN
DVD
/ LD
FRONT
D V D
5.1CH
REC INPUT
IN
CD-R
/ TAPE
/ MD
IN
Video cord
DIGITAL IN
OPT
¥
( T V / S A T ) This receiver*
VIDEO
OUT
MONITOR
OUT
SUB
WOOFER
PREOUT
*The illustration shows
the VSX-D512, but DVD
connections for the
VSX-D412 will be the
same.
02
9
En