Using The Quick Setup - Pioneer VSX-D412K Operating Instructions Manual

02 5 minute guide

Using the Quick Setup

You can use the Quick Setup to get your system
up and running with just a few button presses.
The receiver automatically makes the necessary
settings after you have selected your speaker
setup and room size. If you want to make more
specific settings, refer to Choosing your receiver
setup on pages 35 to 39. Use the front panel
controls for the steps below.
T LOUDNESS TONE
1 Press RECEIVER to turn the power on.
The STANDBY indicator goes out.
2 Press QUICK SETUP.
The display prompts you to select your speaker
setup.
3 Use the MULTI JOG/INPUT SELECTOR
dial to choose your speaker setup.
Cycle between the following choices:
3.0ch
12
En
INPUT
MULTI JOG SELECTOR
ENTER
MASTER VOLUME
QUICK SETUP
DOWN UP
MULTI JOG
R
5.1ch 5.0ch
3.1ch 4.0ch
Check the table below to find the speaker
setup that corresponds with your system.
3.0 ch
3.1 ch
4.0 ch
4.1 ch
5.0 ch
5.1 ch
4 Press ENTER.
The display prompts you to select your room
size.
5 Use the MULTI JOG/INPUT SELECTOR
dial to choose your room size.
Depending on the distance of your surround
speakers, choose between Small, Medium, or
Large (see table below).
Front
Center
Surround
6 Press ENTER to confirm your setup.
The display shows the speaker setup and room
size that you have selected.
4.1ch
Front Center Surround
Speakers Speaker Speakers
√ √
√ √
√ √
√ √
√ √ √
√ √ √
S M
12 ft. 12 ft.
10 ft. 10 ft.
6 ft. 7 ft.
Sub
Woofer
√
√
√
L
12 ft.
10 ft.
9 ft.