Olivetti DP-700 Service Manual page 47

3JX
4. Remove the flexible flat cable from CIS relay
PWB.
5. Remove the connector from the DP inverter
PWB and release the wire from the wire
saddle and edging.
6. Open the reverse unit.
7. Remove the screw and then remove the
original conveying guide.
8. Remove the connector of the DP timing
switch 2.
1-5-6
Connector
DP inverter PWB
DP timing switch 2
Service Manual
Flexible flat cable
Wire saddle
Edging
Figure 1-5-10
Connector
Original conveying guide
Figure 1-5-11
CIS relay PWB
Y106871-5