Olivetti DP-700 Service Manual page 34

Maintenance
item No.
Checking/clearing counts by optional devices
U905
Description
Displays or clears the counts of DP or finisher.
Purpose
To check the use of DP and finisher. Also to clear the counts after replacing consumable parts.
Method
1. Press the start key.
2. Select the device, the count of which is to be checked. The count of the selected device is displayed.
Display
DP
FINISHER
DP
Display
ADP
RADP
Finisher
Display
CP CNT
STAPLE
PUNCH
STACK
SADDLE
Clearing
1. Select the item to be cleared.
To clear the counts for all, press the clear key.
2. Press the start key. The count is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Y106871-5
Description
Description
Counts of DP
Counts of finisher
Description
No. of single-sided originals that has passed through the DP
No. of double-sided originals that has passed through the DP
Description
No. of copies that has passed
Frequency the stapler has been activated
Frequency the punch has been activated
Frequency the stacker has been activated
Frequency the center holding has been activated
Service Manual
3JX
1-3-19