Table of Contents
Advertisement
3JX
Maintenance
item No.
Checking DP operation
U203
Description
Simulates the original conveying operation separately in the DP.
Purpose
To check the DP operation.
Method
1. Press the start key.
2. Place an original in the DP if running this simulation with paper.
3. Select the item to be operated.
4. When selecting [TEST2], to set the magnification using the +/- keys.
Display
TEST 1(NON P)
TEST 2
5. Press the start key. The operation starts.
6. To stop continuous operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking the operation of the DP motors
U243
Description
Turns the motors in the DP on.
Purpose
To check the operation of the DP motors.
Method
1. Press the start key.
2. Select the item to be operated.
3. Press the start key. The operation starts.
Display
DP FEED MOTOR
DP REG MOTOR
DP CONV MOTOR
DP LIFT MOTOR
CIS FAN MOTOR
DP FEED MOT REV
4. To stop operation, press the stop key.
Completion
Press the stop key when operation stops. The screen for selecting a maintenance item No. is displayed.
1-3-10
Description
Operation
Without paper
With paper
Motors
Original feed motor (OFM) is turned on.
Original registration motor (ORM) is turned on.
Original conveying motor (OCM) is turned on.
DP lift motor (DPLM) is turned on.
DP fan motor 1,2,3 (DPFM1,2,3) is turned on.
Original feed motor (OFM) is turned on reversing.
Service Manual
Setting range
Initial setting
-
-
100 to 200 (%)
100
Y106871-5
Advertisement
Table of Contents
