Mechanical Construction - Olivetti DP-700 Service Manual

2-1 Mechanical construction

2-1-1 Mechanical construction
The original placed on the original tray is fed sheet by sheet through the original feeding section and conveyed on the slit
glass. Shortly after one side is scanned by the CCD over the slit glass, the original is scanned by the CIS. The original
attached to the CIS is ejected to the original eject table after the second side is scanned by the CIS.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10) Original conveying pulley
Y106871-5
Figure 2-1-1 Document processor
Original tray
Lift lever
DP forwarding pulley
Original feed color
DP original feed belt
Original feed color
DP separation pulley
Registration pulley
Registration roller
(11) Original conveying pulley
(12) Reading guide
(13) Original conveying roller
(14) Original conveying pulley
(15) CIS
(16) Eject roller
(17) Original conveying pulley
(18) Eject roller
(19) Eject pulley
(20) Original eject table
(21) CIS roller
Service Manual
3JX
2-1-1