Hilti TE 70-AVR Original Operating Instructions page 18

Electrical safety
▶ Before beginning work, check the working area for concealed electric cables or gas and water pipes.
External metal parts of the product could give you an electric shock or cause an explosion if you
accidentally damage an electric cable or a gas or water pipe.
Power tool use and care
▶ Switch the product off immediately if the accessory tool jams. The product might twist off-line.
▶ Wait until the product has come to a complete stop before you lay it down.
3 Description
3.1 Product overview
3.2 Intended use
The product described is an electrically powered combihammer with pneumatic hammering mechanism. It
is designed for drilling in concrete, masonry, wood and metal. The product can also be used for light- to
medium-duty chiseling on masonry and surface finishing work on concrete.
▶ The tool may be operated only when connected to a power source providing a voltage and frequency in
compliance with the information given on the type identification plate.
3.3 AVR option
The product may be optionally equipped with an Active Vibration Reduction (AVR) system, which reduces
vibration noticeably.
3.4 Service indicator
The product is equipped with a service indicator LED.
3.4.1 Service indicator status
Status
The service indicator lights red.
The service indicator blinks red.
3.5 Items supplied
Combihammer, side handle, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group | USA: www.hilti.com
14 English
1
Dust cap
@
Tool holder
;
Accessory tool release
=
Function selector switch
%
Control switch lockbutton
&
Control switch
(
Grip
)
Service indicator
+
Supply cord
:
Side handle
∙
Meaning
End of service interval – servicing is due.
Have the combihammer repaired by Hilti Service.
2063038
*2063038*