DeWalt XR DCG460 Original Instructions Manual page 59

When using segmented diamond wheels, use only
diamond wheels with a peripheral gap not greater than
10 mm and negative rake angle.
DO NOT USE
segmented diamond wheels with a peripheral gap
greater than 10 mm and/or a a positive rake angle.
For all grinding, sanding, and wheel type wire brushing
accessories, the lowest portion of the accessory must
be contained within the guard enclosure with 2 mm or
greater clearance to the bottom lip of guard.
Application Accessory Type
Wheel Type 27
Facial
Grinding
Wheel Type 29
additional Information for Guards and accessories for DCG460
DCG460 Accessory and Guard Applications
Accessory
≤10 mm
Guard
Type 27/Type B (Shallow, Grinding)
1
Maximum wheel thickness, 8 mm.
Type 27/Type B (Shallow, Grinding)
1
Maximum wheel thickness, 8 mm.
EnGLIsh
≥2 mm
Correct Assembly
1
1
57