Menu Navigation; Data Entry; Table 5 - Three-Button Option Functions - Honeywell STT750 SmartLine User Manual

Physical
Button
Increment
Left

Previous Menu Item
Decrement
Center

Next Menu Item
Select displayed
Right
menu item for

activation or editing

4.2.1. Menu Navigation


The user must press
screen, select Exit menu.
Use the  and  buttons to scroll through or wrap around the list of menu items. Press the
to select an item for data entry or activation. When an item is selected for data entry or activation, the
cursor will appear on the lower line of the LCD (Display) to allow editing of the value.
No action is taken against a menu item until the
After a user presses the
within 10 seconds or data entry will time out and the original value of the parameter will be
preserved.
If no button presses occur within 60 seconds, menu access will time out and the transmitter will exit
the menu and return to the PV display.

4.2.2. Data Entry

Data entry is performed from left to right. Select a character / digit by pressing  or  buttons, and

then press to advance to the next character position to the right. Select the << character to
terminate the entry or if the final character is already a space character, just press
All numeric entries are clamped at the low or high limit if needed. You can determine the low and
high limit for a parameter by selecting either the H or L character while the cursor is positioned over
the left-most digit and press
Revision 4
Table 5 – Three-Button Option Functions
Display
Scroll to previous menu item in an active list.
Scroll through alphanumeric list to desired character (ex.
for entering Tag names or numeric values)
Scroll to next menu item in an active list.
Scroll through alphanumeric list to desired character (ex.
for entering Tag names or numeric values)
Call up the menu.
Select an item for data entry.
Confirm a data entry operation
Activate the service associated with a selected menu item.
button to call up the menu. To exit the menu and return to the PV display

button to begin a data entry operation, another button must be pressed

button. The Display will show the selected limit.
STT750 Temperature Transmitter User's Manual
Action

button is pressed.

button

again.
Page 21