Chapter 4. Configuring Via Web-Based Interface; Initial Configuration Wizard - D-Link DWR-921 User Manual
Hide thumbs
Also See for DWR-921:
- User manual (255 pages) ,
- Quick installation manual (52 pages) ,
- How to set up (4 pages)
Table of Contents
Advertisement
DWR-921 4G LTE Router
Configuring via Web-based Interface
User Manual
CHAPTER 4.
CONFIGURING
VIA
WEB-BASED
INTERFACE
Initial Configuration Wizard
To start the Initial Configuration Wizard, go to the Initial Configuration section. On the opened
page, click the OK button and wait until the factory default settings are restored.
Figure 18. Restoring the default settings in the Wizard.
If you perform initial configuration of the router via Wi-Fi connection, please make sure that you
are connected to the wireless network of DWR-921 (see the WLAN name (SSID) on the barcode
label on the bottom panel of the device) and click the NEXT button.
Figure 19. Checking connection to the wireless network.
Click the START button.
Figure 20. Starting the Wizard.
On the opened page, click YES in order to leave the current language of the web-based interface or
click NO to select the other language.
Figure 21. Selecting a language.
Page 32 of 191
Advertisement
Table of Contents
